Resonance Test Systems

Beside the development of the universal high frequency pulsators, SincoTec has enlarged the resonance principle by a multitude of new application fields since its foundation in 1991. From this continous and innovative development process a wide range of special resonance test systems arose, which still keeps growing due to the continously developing requirements of our customers.

Spring test systems, bending and torsion test systems, impressure test systems, bonded steering rear axle test systems and stabilizer test systems, rotating bending resonance test systems, horizontal pulsators, hot shake test system, µ-SWINGLY

High Frequency Pulsators

These machines are quoted with two different drive systems.

1. Component test machine with electromotive POWER SWING MOT drive
Advantage: Large displacements up to 12 mm; suitable for components with big strokes, damping and components with clearance.
2. Material test machine with electromagnetic POWER SWING MAG drive
Advantage: Test frequencies up to 300 Hz
Using resonance test technology and the high test frequencies involved, it is possible to reduce the test periods up to a factor of 10 and test costs up to a factor of 200. A resonance test machine amortizes completely within the first two years because of the extremely low energy costs, compared to servohydraulic systems.

Because of the innovative and universal software, not only single step tests but also tensile tests, characteristic curves, block programs, RANTEC-tests (service load tests) and fracture mechanical tests can be accomplished.
Due to the universality of these test systems, nearly all strength relevant components and units can be tested.